top of page

Aqualusso Thermostatic Shower Valve - 3, 4 & 5 Output with Threaded Connections

 

This Thermostatic shower valve has threaded 15mm connections for the water IN and OUT from the Divertor of the valve. 

These valves can be Retro fitted to older shower panels of the same size specification providing provision is made to change the hoses to those with 15mm threaded connections as is required to connect to the shower valve.

The valve has either 3, 4, 5 or 6 output ports meaning it can output to 3 or 4 different shower options; hand shower, overhead and body jets, bath filler or foot massger being the typical set up.

The valve can be fitted as a replacement or upgrade to shower cabins or steam showers. It comes with threaded COLD WATER IN and threaded HOT WATER IN on the lower part of the body. It also has a THREADED WATER OUT which can be used to feed a water supply to a steam generator. For fitting to NON STEAM models, simply cap this outlet off with a blanking cap

These valves are supplied with dials, faceplates, Divertor core and Thermostatic cartridge. The Thermostatic cartridge pre-fitted is a 'Vernet' Sensor type.

The valve requires water pressures between 1-3 bar balanced and a minimum flow of 7.5 litres per minute to operate.

Distance between valve body sections is 100mm centres.
Fixing Hole Diameters:
Upper Hole: 30mm
Middle Hole: 30mm
Lower Hole: 45mm

Aqualusso Thermostatic Shower Valve - 3, 4 & 5 Output Threaded Connections

£149.95Price
    bottom of page