Portland Whirlpool Bath and Steam Shower 1350mm x 1350mm x 2240mm
A popular model for the family bathroom, where a corner fitting cabin can be accomodated. The whirlpool consists of 5 large whirlpool jets and 2 smaller back jets all driven by a powerful pump. The Portland also has overhead monsoon rain shower, body jets and hand shower, so every member of the family will be sure to find a bathing option they like the best.
Features included:
Overhead monsoon rain Shower, 6 Massage body jets, Multi-function hand shower, FM radio with CD/mp3 input, Remote control, 3kw steam generator, Electronic control pad, Thermostatic shower valve, Circulation fan, Toiletries shelf, Bath filler, powerful whirlpool pump, Low voltage ceiling light, LED lighting, Built in seat, Ozone Sterilization (o3), Bath headrest pillow.
RRP: £2,399.99
Package sizes:
Box 1: 1850mm x 160mm x 550mm
Box 2: 1400mm x 1400mm x 590mm
Box 3: 1650mm x 60mm x1170mm
Box 4: 290mm x 310mm x 1640mm
Click here to
download
the
product
leaflet for
this model
Special Notes:
Large steam rooms allow the occupant to sit or stand at a comfortable distance from the steam outlet whilst enjoying the steam facilities. In order to offer the same steam facilities but within a smaller shower cabin footprint the location of the steam outlet pod may be close to the occupant. Care must be taken when using the steam function to avoid scalding. Children should NOT use the steam within the product unless under strict adult supervision.
Installation Notes:
Electrical: This steam shower cabin requires 2 x 13amp electrical supply. It comes with a plug and RCD fitted, however we recommend you remove the plug and have the cabin installed to a fused spur. If you have an RCD fitted within your mains board you may also remove the RCD fitted to the shower flex.
Water: The cabin requires 1 x hot and 1 x cold water supply. The household water pipes should be fed to a point approximately 1 metre off the floor in the corner where the cabin is to be fitted. Balanced water pressure is required, between 1-3 bar. If using a gravity fed system we recommend you use a shower pump, to provide the required water pressures. We do not supply pumps. The steam cabin is a freestanding product and as such we would recommend your fitter does not fit the shower into locations that mean the cabin cannot be moved away from the wall if needed. The couplings on the cabin to connect to your water supply are standard 15mm compression fittings.
Some of our products arrive in large boxes, please ensure that you have enough room to manoeuvre the boxes and their contents to the installation location.
All Measurements and weights are for guidance only. Package dimensions may change without notification. Whilst every effort is made to ensure this information is kept up to date, design and features are subject to change without notification.
