Looking for an affordable and reliable way to get your new AquaLusso Steam Shower fitted, then look no further.
Steam Shower Fitting Services are an AquaLusso Approved installation company who can install your AquaLusso Steam Shower, Shower Cabin or Steam and Whirlpool Bath.
Steam shower Fitting Services have been installing AquaLusso showers for a number of years, for many hundreds of satisfied customers Nationwide.
What’s included in the price?
Steam Shower Fitting Services, will assemble your shower, seal and connect to your water supply and waste. They will install a Pressure Equalising Valve* if required, connect to the Mains and fully test the shower.
They will then do a complete handover, demonstrating of the functions and features of your new shower.
All work is guaranteed - if there is a problem within the first 28 days that is as a result of the work they have undertaken, they will return and fix the problem at no extra cost to you.
The installers will remove/clean/tidy any mess they make during the install.
Requirements for installation
Hot and Cold water supplies
Smooth even floor
Waste pipe
power supply (model dependant)
Shower delivered and checked.
Waste Trap
PEV (if required)
Pump (if required)
Safe and unrestricted access to install your shower
Your bathroom or en-suite, where the AquaLusso Shower is going to be installed will need to be made ready for the installation. Hot and Cold water supplies must be provided to either the corner, or centre rear (depending upon model) of where the shower is to be installed. The pipework should be fitted with 15mm compression fittings and finished to approximately 1 meter from floor level.
The floor should be a smooth and even surface. Where floor tiles etc are used, these should extend fully under where the shower will be installed so that the shower will not be in any way restricted from being slid in or out of the final installation location.
Do not use vinyl or carpet on the floor or other similar materials that might restrict the movement of the shower.
Any pipework or other extrusions within the footprint of the shower may have an impact on the final positioning of the shower against any of the walls.
A waste connection to your soil pipe will also be required to connect the shower to. You may also need to have a Waste Trap fitted. You can purchase this separately or it can be pre-arrange for the installers to bring one for you**. If the shower requires an electrical supply, then a spur/power outlet in the locality of installation will also be required for the installer to connect to.
Once delivered, ensure the shower has been carefully inspected BEFORE the installers arrive as additional visits may incur further charges.
What’s not included
Removal of old bath or shower
Making good the walls or floor where tiles/bath/shower have been removed.
Installation of pump
Additional pipework
Additional costs
Additional works are charged at £45 per hour which covers 2 installers for the hour. Where any additional work is required, the installers will advise before proceeding and provide timescales and costs as required. Where you require the installers to do additional work as part of the install, this must be notified to the installers before booking so that costs and timescales can be calculated.
Terms and Conditions
A booking deposit of £100 is required to be paid in advance, with the remainder to be paid after the installation handover has taken place.
If the install is unable to take place or be completed due to the following reasons, and requires the installers to return, the cost will be borne by the customer for this return and completion of work. Where the customer cancels the return booking, then the Installers will retain the deposit to cover travel and other associated costs.
These reasons are as follows:
If the installers are unable to commence or complete the install due to the goods having not been checked and subsequently discovered to be damaged or have missing parts.
The shower is found to be the wrong size or colour.
Access to do the install is not made available or is unsafe.
The shower has not been delivered or not available.
The installation requires parts that have not been purchased or ordered through the installers.
The work is cancelled within 48 hours of the pre-booked date/time by the customer.
Demonstration handover requires the customer to be available. The customer or a representative (over 18 years of age) acting on behalf of the customer must be available to sign off the completed work if satisfied. The customer is responsible for the safe disposal of the boxes the product arrived in and its delivery pallet
* Pressure Equalising Valve must be purchased separately if required.
** Cost of Waste Trap is additional to the prices given above.
