The Baccello Steam Shower 1000mm x 1000mm x 2180mm
The Baccello is a luxury steam shower pod. Made from high quality materials; 6mm safety glass, 6mm re-enforced acrylic base and heavy gauge fittings. The back control panel of the Baccello is glass, with a fitted shelf, 8 invigorating body jets water control dials and the electronic computer touch pad, that gives you fingertip control of the steam (time and temperature), the FM Radio, light and fan. The Baccello has a built in USB plug located at the front to enable you to connect MP3 players and even memory sticks with your favorite music tracks, to listen to as you bathe.
Features included:
Overhead monsoon rain Shower, 8 Massage body jets, Multi-function hand shower, FM radio, USB input port, 3kw steam generator, Electronic control pad, Thermostatic shower valve, Toiletries shelf, Low voltage White ceiling light, Built in seat.
RRP: £2799.99
Package sizes:
Box 1: 800 x 1900 x 240mm (117kg)
Box 2: 590 x 1030 x 1030mm (47kg)
Special Notes:
Large steam rooms allow the occupant to sit or stand at a comfortable distance from the steam outlet whilst enjoying the steam facilities. In order to offer the same steam facilities but within a smaller shower cabin footprint the location of the steam outlet pod may be close to the occupant. Care must be taken when using the steam function to avoid scalding. Children should NOT use the steam within the product unless under strict adult supervision.
Installation Notes:
Electrical: This steam shower cabin requires 1 x 13amp electrical supply. It comes with a plug and RCD fitted, however we recommend you remove the plug and have the cabin installed to a fused spur. If you have an RCD fitted within your mains board you may also remove the RCD fitted to the shower flex.
Water: The cabin requires 1 x hot and 1 x cold water supply. The household water pipes should be fed to a point approximately 1 metre off the floor in the corner where the cabin is to be fitted. Balanced water pressure is required, between 1-3 bar. If using a gravity fed system we recommend you use a shower pump, to provide the required water pressures. We do not supply pumps. The steam cabin is a freestanding product and as such we would recommend your fitter does not fit the shower into locations that mean the cabin cannot be moved away from the wall if needed. The couplings on the cabin to connect to your water supply are standard 15mm compression fittings.
Some of our products arrive in large boxes, please ensure that you have enough room to manoeuvre the boxes and their contents to the installation location.
All Measurements and weights are for guidance only. Package dimensions may change without notification. Whilst every effort is made to ensure this information is kept up to date, design and features are subject to change without notification.
